Buying a receiver is one of the most important decisions you need to go
do when building your home theater. The receiver has a number of functions
including connecting and switching audio sources, connecting and switching video
Sources, decoding surround sound formats; gain of an audio signal and send
speaker, the optimization of radio stations and an interface between
You and your home theater.
The firstThings to think about whether you want a receiver at all or would
better to buy a separate decoder, amplifier, and tuner?
Although a more expensive - are not required to mention the extra space -
separates have some advantages. You can choose and select their
Combination of components that will improve each component individually, and not
lose all the functions if one piece fails. In addition, each
eComponent in a separate container does not improve the sound quality compared
I'm with them all on a card.
However, the gap between expensive, complicated and needs more
Space than to buy a receiver. And for most people its uneccessary. Recipients of today
this is a very good job in all its functions.
So, what to look for when you need to buy a receiver? The first thing is
ll make sure that the inputsThe need for all equipment necessary to connect
a. It seems obvious, but very easy to overlook. At the very least should have
digital audio inputs (optical and coaxial) for Dolby Digital or DTS. It should
analog audio inputs for CD players, set-top box and possibly DVD-Audio
or Super Audio CD (the latter two currently do not have digital outputs for
make it less easy to pirate CDs).
You should also consider whether you want to route allThe video sources such as
TV, DVD player and games console through your receiver. This means that you
Switching from a source from a controller, very easily. But if you want to do this
You must ensure that the inputs of the receiver are interested in video than enough.
These could be the inputs S-video or component are the best, or if you Scart in Europe.
You should also make sure that the video output of the receiver is of high quality,
Again it should be S-Video, component and SCART.
If you can check before buying a receiver, it is worthwhile to compare the quality of his videos
Signal from a DVD player if its connected directly to a monitor and comparison
with, if his receivers connected via the Internet. There should be sensitive
Difference in quality.
The performance of the amplifier is also important. The larger the space you have
for your home theater, the strongest six. Need It ensures that the power
The assessment is quoted in watts per channel - the last thing I want is to go home with
And the receiver 100Watt to explore that his power is divided among the eight speakers
7.1 and above. You can not specify what should be the amplifier,
but if your home theater room is a reasonable size, like an airplane, unlike
Hooks should be 100 watts per channel in order.
Finally, do not forget the remote control. It isthe most important interface between you and the
Receiver, and you spend a lot of time to use it. Just make sure it is comfortable and
easy to use. The last thing I want is to spend hours wading
getting by on-screen menus, what you want.
Recommend : Hitz Song BOB Revolution Stroller EUREKA STUDIO Montre Automatique Hobos Handbags Best Tissot PRS200
No comments:
Post a Comment